Fully Hydraulic Core Drilling Rig Crawler Mounted Geological
The HYDX-6 core drilling rig is mainly used in fields of geology,
metallurgy, coal, petroleum, natural gas, and groundwater. And its
main components are main winch, hydraulic pump group, main valve
and hydraulic motor.
1. This core drilling rig is small in size, light in weight,
flexible in operation, and convenient in operation.
2. Double-motor driving closed loop and dual-shift mechanical
hydraulic stepless speed adjustment mode are designed for this core
3. Its mast is controlled by oil tank. It is capable of touching
ground, and folding is available.
4. Load-sensing control system is used for its hydraulic system.
5. It is equipped with high-position working platform and orifice
6. Hydraulic outrigger device is also equipped for it.
7. Upper centralizer and Lower guiding device are fitted in this
core drilling rig.
8. Hydraulic holder is equipped for its orifice.
Technical Parameters of HYDX-6 Core Drilling Rig:
|Diesel engine||Model||Cummins 6CTA8.3-C240|
|Capacity of power head||Rotation speed||Two-gear stepless 0-1100rpm|
|Through-hole diameter of spindle||121mm|
|Max. pull force||220 KN|
|Max. feeding force||110 KN|
|Capacity of main winch||Lifting force of single wireline||120 KN|
|Diameter of wireline||22mm|
|Length of wireline||60m|
|Capacity of wireline winch||Lifting force of single wireline||15KN|
|Diameter of wireline||6mm|
|Length of wireline||2000m|
|Adjustable angle range||0°-90°|
|Overall dimensions (L×W×H)||6250×2220×2500mm|
|Movement pattern||Steel track self-propelled|
|Lower holder||Clamping range||55.5-117.5mm(through-holeφ154mm)|